|
Category
類 別
|
Trade-
Mark
牌 號
|
Equivalent to China Standard
相當國標
|
Characteristics & application
特性和用途
|
Equivalent to AWS
相當AWS
|
|
Hard-surfacing
硬
面
堆
焊
|
D 667
|
EDZCr-B-15
|
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
HRc≥48，耐磨、耐氣蝕、抗氧化。堆焊高爐料鐘、破碎機件
|
|
|
D 802
|
EDCoCr-A-03
|
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
HRc38-47，耐熱、耐蝕、耐磨。堆焊高溫工件如熱剪切刀刃
|
ECoCr-A
|
|
D 812
|
EDCoCr-B-03
|
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
HRc45-50，耐熱、耐蝕、耐磨。堆焊高溫工件如內燃機閥
|
ECoCr-B
|
|
D 822
|
|
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
HRc≥53，耐熱、耐磨，但抗沖擊性差。堆焊鍋爐旋轉葉輪
|
|
|
D 832
|
EDCoCr-C-03
|
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
HRc≥50，耐熱、耐磨。堆焊高溫工件如熱軋導軌
|
ECoCr-C
|
|
D 842
|
EDCoCr-D-03
|
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。堆焊熱鍛模
|
|
|
Cast iron
鑄
鐵
|
Z 308
|
EZNi
|
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛
|
ENi-Cl
|
|
Z 408
|
EZNiFe
|
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋
|
ENiFe-Cl
|
|
Z 508
|
EZNiCu-1
|
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊
|
ENiCu-B
|
|
Copper alloys
銅
合
金
|
Cu 107
|
ECu
|
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排
|
ECu
|
|
Cu 207
|
ECuSi
|
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用
|
ECuSi
|
|
Cu 227
|
ECuSnB
|
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用
|
ECuSn-C
|
|
Cu 237
|
ECuAl
|
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或堆焊用
|
ECuAl-A2
|
|
Aluminum alloys
鋁
合
金
|
Al 109
|
TAl
|
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
純鋁，耐蝕性好，但強度不高，純鋁焊接用
|
E1100
|
|
Al 209
|
TAlSi
|
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金
|
E4043
|
|
Al 309
|
TAMn
|
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
鋁錳，強度高，耐蝕。鋁合金焊接用
|
E3003
|
|
Nickel alloys
鎳合金
|
Ni 102
|
ENi-1
|
Pure nickel. Welding and surfacing of nickel and nickel to steel.
純鎳，用于鎳、鎳與鋼的焊接與堆焊
|
ENi-1
|
|
Ni 207
|
ENiCu-7
|
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
鎳銅，用于鎳銅、鎳銅與鋼的焊接與堆焊
|
ENiCu-7
|
焊絲
<
|
Category
類 別
|
Trade
mark
牌 號
|
Chemical comb
主要成份(%)
|
Characteristics & application
特性和用途
|
Equivalent to AWS
相當AWS
|
|
Hardfacing
硬
面
堆
焊
|
S 101
|
C3 Cr28 Ni4
Si3.5 Fe Rem.
|
HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.
HRc48-54，耐磨、耐氣蝕、抗氧化。堆焊鏟斗齒，泵套
|
|
|
S 111
|
C1 Cr29 W5
Co Rem.
|
HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.
HRc38-47，高溫下耐磨、耐蝕。堆焊高溫高壓閥門
|
ECoCr-A
|
|
S 112
|
C1.5 Cr29 W8
Co Rem.
|
HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.
HRc45-50，高溫下耐磨、耐蝕。堆焊閥門，熱軋孔型
|
ECoCr-B
|
|
S 113
|
C2.5 Cr30 W17
Co Rem.
|
HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.
HRc≥55，高溫下耐磨、耐熱，但抗沖擊性差。堆焊螺旋送料機用
|
|
|
S 114
|
C2.5 Cr30 W12
Co Rem.
|
HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.
HRc≥53，高溫下耐磨、耐熱，但抗沖擊較差。堆焊牙輪鉆頭
|
ECoCr-C
|
|
Copper
alloys
銅
合
金
|
S 201
|
Sn1 Si0.3Mn0.3
Cu Rem.
|
Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
機械性能好，抗裂性好。紫銅氣焊及氬弧焊用
|
ERCu
|
|
S 211
|
Si3 Mn1
Cu Rem.
|
Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
機械性能好，銅合金氬弧焊及鋼的MIG釬焊用
|
ERCuSi-Al
|
|
S 212
|
Sn5 Cu Rem.
|
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。銅合金氬弧焊及鋼的堆焊用
|
ERCuSn-A
|
|
S 213
|
Sn8 Cu Rem.
|
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。銅合金氬弧焊及鋼的堆焊用
|
ERCuSn-C
|
|
S 214
|
Al7.5 Cu Rem.
|
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用
|
ERCuAl-A1
|
|
S 215
|
Al9 Cu Rem.
|
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用
|
ERCuAl-A2
|
|
S 221
|
Cu60 Sn1 Si0.3
Zn Rem.
|
Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
|
|
|
S 221F
|
Cu60 Sn1 Si 0.3
Zn Rem.
|
S221 welding rod coated with flux.
外涂焊劑的S221焊絲
|
|
|
S 222
|
Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.
|
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
|
RBCuZn-C
|
|
S 222F
|
Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.
|
S222 welding rod coated with flux.
外涂焊劑的S222焊絲
|
RBCuZn-C
|
|
S 223
|
Cu59 Sn0.6
Zn Rem.
|
Melting point is about 900℃. Braze welding of copper, steel and cast iron.
熔點約900℃。銅、鋼、鑄鐵釬焊用
|
RBCuZn-A
|
|
S 224
|
Cu62 Si0.5
Zn Rem.
|
Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
|
|
|
Copper
alloys
銅
合
金
|
S 225
|
Cu48 Ni10
Zn Rem.
|
Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.
熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用
|
RBCuZn-D
|
|
S 225F
|
Cu48 Ni10
Zn Rem.
|
S225 welding rod coated with flux.
外涂焊劑的S225焊絲
|
RBCuZn-D
|
|
S 226
|
Cu60 Sn0.3
Si0.2 Zn Rem.
|
Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.
熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵
|
|
|
S 227
|
Cu58Sn0.9Ni0.5
Si0.1 Fe0.8
Zn Rem.
|
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
|
RBCuZn-B
|
|
S 229
|
Cu55 Ni6 Mn4
Zn余
|
Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.
熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用
|
|
|
Aluminum alloys
鋁
合
金
|
S 301
|
Al≥99.5
|
Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
塑性好、耐蝕。純鋁氣焊、氬弧焊用
|
ER1100
|
|
S 311
|
Si5 Al Rem.
|
Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
抗裂性好，通用性大。鋁合金氣焊、氬弧焊用。不宜用高鎂合金
|
ER4043
|
|
S 321
|
Mn1.3 Al Rem.
|
Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用
|
|
|
S 331
|
Mg5 Mn0.4
Al Rem.
|
Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
耐蝕，強度高。鋁合金氬弧焊用
|
ER5183
|
釬焊料
|
Category
類 別
|
Trade-mark
牌號
|
Specification
規 格
|
Melting
Point
熔點(℃)
|
Chemical
comb
主要成份(%)
|
Application
用 途
|
Equivalent
to AWS
相當AWS
|
|
Copper
zinc
銅鋅
|
L103
|
Wire & rod
絲
|
885-888
|
Cu54 Zn Rem.
|
Brazing of copper, bronze and steel, subjected to low load.
釬焊銅、青銅和鋼等受力不大工件
|
|
|
L104
|
Foil
箔
|
890-930
|
Cu57 Mn2
Co2 Zn Rem.
|
Brazing of carbide cutting tool.
釬焊硬質合金刀具
|
|
|
Copper
phosphorus
銅磷
|
L201
|
Cast rod, wire & rod, powder
鑄條、絲、粉
|
710-800
|
P7 Cu Rem.
|
Brazing of copper and copper alloys.
釬焊銅及銅合金
|
BCuP-2
|
|
L204
|
Cast rod, wire
鑄條、絲
|
640-815
|
P5 Ag15
Cu Rem.
|
Brazing of copper, copper alloys, silver and molybdenum etc.
釬焊銅及銅合金、銀、鉬等金屬。
|
BCuP-5
|
|
L205
|
Cast rod, wire & rod, powder
鑄條、絲、箔
|
640-800
|
P6 Ag5
Cu Rem.
|
Brazing of copper and copper alloys.
釬焊銅及銅合金
|
BCuP-3
|
|
L207
|
Cast rod, wire & rod
鑄條、絲
|
640-770
|
P7 Ag5
Cu Rem.
|
Brazing of copper and copper alloys.
釬焊銅及銅合金
|
BCuP-7
|
|
L209
|
Cast rod, wire
鑄條、絲
|
684-710
|
P7 Ag2
Cu Rem.
|
Brazing of copper and copper alloys.
釬焊銅及銅合金。
|
BCuP-6
|
|
Silver
base
銀基
|
L302
|
Wire & rod
絲
|
745-775
|
Ag25 Cu40
Zn Rem.
|
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
|
|
|
L303
|
Wire & rod
絲
|
660-725
|
Ag45 Cu30
Zn余
|
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
|
BAg-5
|
|
L303F
|
Flux coated rod
涂藥絲
|
660-725
|
Ag45 Cu30
Zn Rem.
|
L303 coated with flux, the same application as L303.
外涂釬劑的L303，用途與L303相同
|
BAg-5
|
|
L304
|
Foil
箔
|
690-775
|
Ag50 Cu34
Zn Rem.
|
Brazing of copper, copper alloys and steel etc.
釬焊銅及銅合金、鋼等
|
BAg-6
|
|
L308
|
Wire & rod
絲
|
779-780
|
Ag72 Cu Rem.
|
Brazing of copper and nickel under vacuum or reducing protective atmosphere.
銅和鎳的真空或還原保護氣氛釬焊
|
BAg-8
|
|
L312
|
Wire & rod
絲
|
595-605
|
Ag40.Cu.Zn.Cd
|
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
|
|
|
L313
|
Wire & rod
絲
|
625-635
|
Ag50.Cu.Zn.Cd
|
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
|
BAg-1a
|
|
L321
|
Wire & rod
絲
|
615-650
|
Ag56.Cu.Zn.Sn
|
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
|
BAg-7
|
|
L323
|
Wire & rod
絲
|
665-755
|
Ag30.Cu.Zn.Sn
|
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
|
|
|
L325
|
Wire & rod
絲
|
645-685
|
Ag45.Cu.Zn.Sn
|
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
|
BAg-36
|
|
L326
|
Wire & rod
絲
|
650-720
|
Ag38.Cu.Zn.Sn
|
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
|
BAg-34
|
|
Aluminum base
鋁基
|
L400
|
Cast rod, wire & rod
鑄條、絲
|
577-582
|
Si11.5
Al Rem.
|
Brazing of aluminum and aluminum alloys.
鋁及鋁合金的釬焊
|
BAlSi-4
|
|
L401
|
Cast rod
鑄條
|
525-535
|
Si5 Cu28
Al Rem.
|
Brazing of aluminum and aluminum alloys.
鋁及鋁合金的釬焊
|
|
|
Tin lead
錫鉛
|
L600
|
Wire & rod
絲
|
183-185
|
Sn60 Sb≤0.8
Pb Rem.
|
Soldering of fusible bls and heat-treated part.
易熔金屬及熱處理件的釬焊
|
60Sn
|
|
L601
|
Wire & rod
絲
|
183-227
|
Sn18 Sb2
Pb Rem.
|
Soldering of copper, copper alloys and galvanized iron plain sheet.
銅及銅合金、鍍鋅鐵皮的釬焊。
|
18Sn
|
|
L602
|
Wire & rod
絲
|
183-256
|
Sn30 Sb2
Pb Rem.
|
Soldering of copper, brass, copper alloys and galvanized iron plain sheet.
銅、黃銅、鐵、鍍鋅鐵皮的釬焊
|
30Sn
|
|
L603
|
Wire & rod
絲
|
183-235
|
Sn40 Sb2
Pb Rem.
|
Soldering of copper, copper alloys, steel and zinc parts.
銅及銅合金、鋼、鋅制零件的釬焊
|
40Sn
|
|
L604
|
Wire & rod
絲
|
183-222
|
Sn90 Sb≤0.15
Pb Rem.
|
Soldering of copper and steel for food and medicine field.
食品、醫療所需銅、鋼等金屬的釬焊
|
90Sn
|
|
L605
|
Wire & rod
絲
|
232-240
|
Ag5 Sn95
|
Soldering of copper and steel for electrical and food field.
電器、食品所需銅、鋼等金屬的釬焊
|
|
|
L608
|
Wire & rod
絲
|
295-305
|
Sn5.5 Ag2.5
Pb Rem.
|
Soldering of copper, copper alloys, steel and stainless steel.
銅及銅合金、鋼及不銹鋼的釬焊
|
|
|
Nickel base
鎳基
|
L702
|
Powder
粉
|
970-1000
|
Cr7 B3 Si4
Ni Rem.
|
Brazing of stainless steel under vacuum or protective atmosphere.
不銹鋼真空或保護氣氛釬焊
|
BNi-2
|
氣焊及釬焊熔劑
|
Category
類 別
|
Trade-mark
牌 號
|
Product name
名 稱
|
Characteristics & application
特性和用途
|
|
Gas
welding
氣焊
|
CJ301
|
Copper gas welding flux
銅氣焊熔劑
|
Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.
熔點約650℃，銅及銅合金氣焊或釬焊的助熔劑
|
|
CJ401
|
Aluminum gas welding flux
鋁氣焊熔劑
|
Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.
熔點約560℃，鋁及鋁合金氣焊的助熔劑
|
|
Silver
brazing
銀釬焊
|
QJ101
|
Silver brazing flux
銀釬焊熔劑
|
Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.
在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
|
|
QJ102
|
Silver brazing flux
銀釬焊熔劑
|
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.
在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
|
|
QJ102A
|
Silver brazing flux
銀釬焊熔劑
|
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.
在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼。不易結塊
|
|
QJ112
|
Silver brazing paste flux
膏狀銀釬焊熔劑
|
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.
在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
|
|
QJ103
|
Silver brazing flux
銀釬焊熔劑
|
Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.
在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
|
|
Aluminum brazing
鋁釬焊
|
QJ201
|
Aluminum brazing flux
鋁釬焊熔劑
|
Brazing flux of aluminum and aluminum alloys within 450-620℃.
在450-620℃范圍釬焊鋁及鋁合金的助熔劑
|
|
QJ207
|
Aluminum brazing flux
鋁釬焊熔劑
|
Brazing flux of aluminum and aluminum alloys within 560-620℃.
在560-620℃范圍釬焊鋁及鋁合金的助熔劑
|
|
